3D-Printed, Battery-Powered, Fully-Automated, Open-Source, Combination Lock Cracking Device

Combo Breaker

#HowTo

Sat, May 16th, 2015 11:00 by capnasty NEWS

Using a technique in which a combination lock can be opened in 8 tries or less, @SamyKamkar explains how to 3D print an open source version that does it all automatically.

Combo Breaker is a motorized, battery powered, 3D printed, Arduino-based combination lock cracking device. It is portable, open source, 3D models provided, and exploits a new technique I've discovered for cracking combination locks in 8 attempts or less, but in an even more exciting, automated fashion.

  1105

 

You may also be interested in:

50 Ways to Get Your Life in Order
How to Avoid Jury Duty
How to Work When the Boss Is Away: A Handy Guide
How To Unlock the Airplane Lavatory Door (From the Outside)
How to Build a 4 Barrelled Rocket Launcher